With the development of The Times more and more fast, all walks of life have accelerated the speed, precision machining is also smoothly squeezed into the market, that today Xiaobian today to give you the popularization of precision machining skills and tips.
Trick one: Remove the jaws of the vise and process two M4 threaded holes. Then, two steel plates with a thickness of 1.5mm are flush with the jaws, and the hard brass plate with a thickness of 0.8mm are riveted with an aluminum counterhead and fastened to the jaws with M4 counterhead screws to form a durable soft jaws. This can also maintain hardware parts are not damaged by clamping, but also have interchangeability.
Trick two: Draw small parts with a magnet (fee) suction and take are inconvenient, can be in the magnet 1 below the suction of an iron plate 2, not only can absorb a lot of small pieces, and the iron plate will be pulled away, small pieces will immediately automatically pour into the collection box, lack to move the heart, but very applicable.
Trick three: belt wheel drive, often between the pulley and the axle slip, in the axle with ￠15~18mm hole drill to scratch a series of holes, which can form the adsorption force, avoid slipping, turn waste into treasure, the boss will reward.
Trick four: when the 1 handle of the hexagon wrench is short and can not be concentrated, the inner diameter of the tube is slightly larger than the wrench from a section of the milling groove to insert the wrench into the groove, which can be used as a long handle.
Trick five: on the tightening of the workpiece has the first positioning and clamping, but about a workpiece, the first clamping and positioning, because the clamping will certainly try the deformation of the workpiece, so, should be the first clamping and positioning, about 6 points positioning, find the limit of its ease.
